ALC - Abanaki

A UK manufacturer was in the market for a way to clean its coolant. An employee at the facility had been informed of the benefits of using the Abanaki Coolescer for coolant cleaning purposes. Plant operators decided to use the Coolescer on one of its machines that desperately needed its coolant cleaned. The approach was, if the Coolescer could clean this particular machine’s coolant, it could clean anything.

Choosing the right oil skimmer may improve the oil collection rate depending on the application. In a parts washer application, a belt skimmer is usually the best choice because of its small footprint and its ability to use various belt types to handle harsh conditions. Shallow wastewater sumps may have less than one foot of water, requiring a tube type oil skimmer that uses a tube that can float on the surface and collect the oil without bottoming out. Standard coolant sumps may be able to be cleaned up with an inexpensive disk skimmer while other sumps may have very little access. Some sumps can only be accessed with an oil skimmer that can bolt to the side of the tank and have a tube access the sump through a cutout in the side of the tank. If you’re not sure which skimmer would best suit your plant’s application, contact an Abanaki’s sales rep today and they’ll help determine which oil skimmer is right for your application! Or click the photo below to launch our Oil Skimmer Selection guide and click the X that fits your application to find out what skimmer is best for you.

An Ohio Manufacturer was facing a problem at its multiple machining centers were becoming contaminated with tramp oil. The plant manager was concerned with rising disposal and replacement costs for the five machining centers. With coolant needing to be replaced in the tank every three months, Hahn Manufacturing contacted Abanaki to find a solution to its troublesome coolant costs. After further inspection, it was suggested that Hahn use Abanaki’s Mighty Mini SST Oil Skimmer. This skimmer can remove one to two gallons of medium weight oil per hour. The stainless steel construction enables it to operate in harsh chemicals and heat, while the integrated timer lets it run only when needed. It is designed to reduce water content in the disposed oil. Its compact size allows it to fit almost anywhere.

Many of the machining centers built today have limited access to the coolant sump. This presents an interesting challenge to plant maintenance personnel on how to remove...