ALC - Abanaki

The Oil Concentrator operates without any reliance on electrical components or moving parts, simplifying its design and maintenance. Its functioning is straightforward: it directly receives liquid from the skimmer. The fundamental principle at play is gravity separation. To facilitate effective separation, the Concentrator tank is sized in a manner that allows sufficient duration for the oil and water to naturally segregate.

If you are running your skimmer 24/7 and the tank or pit runs out of oil, your skimmer will pick up whatever is remaining in the tank, and most of the time that will be water or coolant. There is a way to prevent this and that is by utilizing an oil water separator/concentrator in conjunction with your oil skimmer.

There are several things to consider when choosing a belt or tube material for your oil skimmer. Some plastics will not stand up to heat or strong chemicals. Certain metal belts will not skim coolants effectively. Smooth belts do no pick up floating emulsified oils. Specific plastic belts do not last in heated applications, while other types of plastic belts will.

Why Coolant Goes Bad

Recently John, an Abanaki sales rep, visited a customer that was in need of replacing some old components in its skimming operation. The facility uses the Model 8 oil skimmers on tanks that are 20 ft off of the ground. The skimmed hydrocarbons are drained in to an oil concentrator below. The oil concentrators at the facility are very old and don’t preform like they have in previous years. John suggested the company replace the older oil concentrators with Abanaki’s OC200.